Certain equipment has been developed to protect our magnetic field, thus helping neutralize harmful electromagnetic fields of radiation. The sluggishness, fatigue, nausea, dizziness, irritability, eye strain, rashes and other health problems associated with continuous exposure to high electromagnetic fields (above 30 Hz) can be counteracted with a device designed to blanket an area of about 20,000 square feet. This larger unit was designed to protect a home or office environment against harmful grid lines, geomagnetic disturbances, artificially generated electromagnetic standing waves, extremely low frequencies (ELF frequencies) and other harmful waves. The Total Shield is composed of two separate electronic generators. One generator is a detector device that identifies the frequencies of the geomagnetic disturbances and grid lines from the environment and broadcasts them back out through a Tesla coil, which cancels out the disturbance.
The other generator is a 7.83 frequency generator, which duplicates the Schumann resonance (the resonant frequency of the Earth's magnetic field). Normally, one of these units is sufficient to protect a large home or office area.
However, where electromagnetic pollution is severe, such as areas near high-voltage power lines, transmitting towers for TV or radio towers, more than one unit might be necessary to overcome the severity of the pollution. According to some electrical engineers, the Total Shield unit will also strip radiation pollution from your body.
The Total Shield is an essential asset to protect homes, offices and families from electromagnetic pollution. You can use the Total Shield in one of three ways: EMF protection only, geopathic stress only or a combination of both. Operates on AC adapter (included). The units are available in one, two, three and four coil strengths, with each additional coil adding 50% more intensity.
Stronger units are appropriate for people who are very sensitive to EMFs; who have a large number of electronic devices in their home or office; or who live very close to power lines or stations. All units measure 9" high x 4.5" in diameter. Specifications: Power Requirements: 9-15 Volts and includes an AC Wall Adapter Weight: 1.5 Pounds Dimensions: 9.5" x 4.5" Best Place in a Central Location Maximum Field Input: One Coil: 100 millivolts/square meter Two Coils: 141 millivolts/square meter Three Coils: 170 millivolts/square meter Four Coils: 200 millivolts/square meter Minimum Field Input: Measurable to 1XE-12 volts per square meter Effective Coverage Area: One Coil: 20,000 square feet (when field does not exceed 10 millivolts per square meter) Two Coils: 28,280 square feet Three Coils: 34,641 square feet Four Coils: 40,000 square feet Magnetic Opposition: Equivalent to a value of 1 h(oersted) in an area of 20,000 square feet (grid line nulling).Ll models of the Total Shield have the same label. The additional coils are signified by color dots on the top and bottom of the shield. A red dot indicates a two coil unit, an orange dot means three coil and a yellow dot means a four coil. Different power levels are given in the booklet for the various number of coils. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detector Accessories". The seller is "sydneyb222" and is located in this country: US. This item can be shipped to United States.