Quest X10 IDmaxX Metal Detector with WireFree Lite Wireless Headphones
Engineered on Quest's CVX Compact VLF platform, the Quest X10 IDmaxX operates at a single 12 kHz frequency with a user-adjustable frequency shift to mitigate electromagnetic interference. Designed for detectorists who evaluate equipment based on target resolution, signal processing, and recovery speed, this bundle pairs the high-coverage Blade11 Double-D search coil with integrated 2.4 GHz digital wireless audio.
Operating Architecture: Continuous Wave Very Low Frequency (VLF) on the CVX Compact platform. Operating Frequency: 12 kHz with user-adjustable Frequency Shift. Search Coil Configuration: 11 inches by 10 inches Blade11 Waterproof Double-D (DD). Target Identification: 2-Digit Numeric VDI (1 to 99) supplemented by a 10-Segment Target ID Arc.Ground Balancing: Manual pump-balance with dedicated quick-access tracking. Audio Response: Proprietary low-latency 2.4 GHz WireFree link (60 ms delay) and 6 Selectable Tone Schemes (C1 through C6). Discrimination: Full 1 to 99 notch discrimination with individual segment rejection. Submersibility: Main unit and coil fully IP-rated submersible to 10 feet (3 meters).
Power Supply: Internal 1000 mAh Li-Po battery via USB-C. Mode Performance & Signal Processing. Pre-set notch rejection active for VDI below 40 to silence small ferrous clutter, foil, and low-conductive trash.
Optimized for dense trash environments with a rapid audio reset. Minimal ferrous rejection with VDI under 20. Utilizes a high recovery speed setting to minimize target masking in historical, high-iron sites while the Blade11 DD coil maximizes ground coverage per sweep.Unfiltered motion hybrid response featuring an adjustable continuous threshold hum optimized for small low-conductive targets and small gold nuggets. Direct pump ground balance handles hot rocks and heavy mineralization. Allows full customization and non-volatile memory retention of notch profiles, tone boundaries, and sensitivity thresholds. Zero Audio-Lag Setup: Integrated 2.4 GHz transmitter links directly with included WireFree Lite low-latency headphones.
Super3D Telescoping Shaft: High-rigidity modular aluminum shaft system for fast breakdown and field packability. Auxiliary Outputs: Built-in speaker, handle vibration feedback, display backlight, and target illumination LED. Quest X10 IDmaxX Control Module and Telescoping Super3D Shaft Assembly.
Blade11 Waterproof 11 by 10 inch Double-D Search Coil and Cover. Quest WireFree Lite 2.4 GHz Low-Latency Wireless Headphones. USB-C Charging Cable and USB-C to 3.5mm Headphone Adapter.