Metal Detector Accessories

Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting

Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting

Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting
Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting. Technology Unique Patented process incorporates 3 degrees of separation. Versatility Mine placer, beach, crushed ore, free milling ore, mine dump testing and can be set up in the water or off site recirculation. Portability Modular design for fast setup and easy exit. Fit in the trunk yet gets as much gold as machines many times its size. Efficiency Set it up level, turn on pump, and process 1,000 pounds of 1/8th classified material to a few ounces in minutes. Durability Made in America with LDPE (low-density poly) just like your cutting board at home. Theres no doubt that you will be impressed with the Gold Cube and we love to hear it! If for any reason you have a problem please call. When deciding which Gold Cube to use (3 Stack Deluxe or 4 Stack), there are several factors to consider: price; size (footprint); and the type of gold you may encounter. Many gold prospectors with the typical sluice box have witnessed that very flat gold (glitter gold) has the tendency to drift or sail over riffles. This is because flat gold lends itself to slight current manipulation and water surface tension that may allow it to float. The Gold Cube design eliminates surface tension in what we call the G-Force Separator, which forces everything below water under a gate. This breaks the surface tension and forces the gold to the bottom of an axial trough. The combination of gravity and hydraulic pressure makes it impossible for the gold to float or sail. To illustrate this If you were to drop a flat washer and a steel bearing, both weighing the same, into a swimming pool at the same time, the steel bearing would hit bottom, first. In the same way, the flatter the gold; the more time it takes to settle. Location is not the only factor to be aware of, though we have found that there are areas where the gold is typically very flat.

Keep in mind, it is all about the shape of the gold, and not where it is located. Many placer areas close to the source have gold that is chunky, roundish, and not flat. If you plan to limit your mining to this type of area, then a 3 Stack may be your machine.

You can add a tray, later, if you decide to go to the beach or find a tailings pile with super-fine gold. Gold Cube Trommel (Next Generation). The New and Improved Gold Cube Trommel! Now the spray bar is on the outside of the barrel allowing more area inside the barrel. Any gold prospector will tell you how important classifying is during not only primary processing in the field but also during your final clean up and recovery. There are thousands of tailings piles out there with gold because in the past, many miners were after the bigger stuff and the small gold was just left to wash away. Gold is Gold as the saying goes but today if you can get the small you can get it all. Classifying to manageable size for your material has always been a very time consuming yet rewarding effort especially with the Gold Cube. Since the Gold Cube likes 1/8th material this step is critical and very easy if you are running concentrates from your dredge or sluice box but what if you are just out using only a Gold Cube as your primary equipment?

In the past we would classify with a #8 into a bucket and line these buckets up as the feeder would scoop all the buckets into the cube. This method works quite well but to pre-cassify 1,000 lbs of material (about 15 buckets) could take 2 hours or more of some serious shoveling. So here is our solution to that! The Gold Cube Trommel is Shovel Ready and goes anywhere and wont talk back.

A dependable machine that can outlast you (bring friends)! Just try to wear out our trommel and reap the rewards. Strong 12 volt motor designed for continuous use. Hardware and template included (simply drill 4 holes). The item "Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting" is in sale since Saturday, May 19, 2018. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detector Accessories". The seller is "treasuremtnmetaldetectors" and is located in Mount Juliet, Tennessee. This item can be shipped to United States.

  • Intended Use: Gold Prospecting
  • UPC: 092145505595
  • Model: Gold Cube 4 Stack Deluxe with Gold Trommel
  • MPN: GC-01_GC-12
  • Country/Region of Manufacture: United States
  • Brand: Gold Cube
  • Type: Ground Search


Gold Cube 4 Stack Deluxe Complete Kit with Gold Trommel for Gold Prospecting