Coiltek Camo Elite 14-inch Round Mono Searchcoil for Minelab Metal Detectors
New Coiltek Camo "Elite" 14-inch Round Mono Searchcoil, using new LITZ wire (includes skidplate & hardware). The new coil is using. New innovative mono configuration and LITZ wire for.
More depth and sensitivity than any other 14-inch Mono Round on the market today. Reports back from this coil out of Australia and the US are amazing.
Reports with this coil on the Minelab PI (SD, GP and GPX) series are getting several more inches in depth and much greater sensitivity on small gold. The ELITE series utilise a new winding innovation which was engineered and produced by COILTEK. This new winding optimises the transmit and receive signals, therefore improving depth and sensitivity when compared to a standard wound similar sized coil of up to an extra 30%.
With a brand new camouflage look these coils give the detectorist smooth stable operation and no abnormal external interference issues. The series perform smoother than any other standard coil on the market. Any detector operator with a SD/GP/GPX machine could be missing out on Optimising Discovery if they are not swinging with the ELITE. Here are a couple of quick testimonials on the product so far.
They are a great coil, had a demo one out for a weekend with Hermann Steffen and Graham Ashton a few weeks back. Both put their names down for one. Didn't test it against the Goldstalker but did against the Nuggetfinder 14" and 12" adv.
Put it at a depth where the 12" NF just couldn't get it and the 14" NF would only pull you up if gridding or knew it was there. It gave a clear signal that there was something there on the first swing using the Elite. It gave my GPZ a good run as the main diff was the smoother threshold on the Z running audio smoothing high, signal being very clear even quite a few inches above the ground whereas the Elite dropped off a bit quicker.
I was impressed with the Elite as it did run nice and quiet on the 5000 so I might even have to get one. I had the opportunity over the Easter weekend to test the new Coiltek 14 Mono Elite coil on my GPX5000. The coil ground balanced quickly and was stable and quiet.
I was working on rocky ground and the coil didn't false when hitting rocks or being pushed under bushes. I found the coil to be.
To small nuggets at depth. I located a 0.5gm nugget at 250mm and a 1.4gm nugget at 300mm. Nuggets down to 0.03gms were recovered. The new coil clearly indicated a 0.5 nugget that the standard 14 mono didn't recognise. Here are some of the key features of this new coil. 14 round or 350mm in diameter. 1130 grams or 40 ounces approx.Suits the Minelab SD / GP / GPX detectors. Sharp and bright response to targets. Extremely sensitive and quiet in operation. From current tests consistently achieving 1-2 inches greater depth than the standard 14 Mono by Coiltek. Optimizes the SD, GP and GPX detectors performance.
This new coil is getting crazy reviews from users using anything from an older SD, GP and new GPX series. I personally field tested this coil with the GPX 5000 and it was very impressive. Rob's Detector Sales Surprise, Arizona.
We are adding products weekly to the store. We are a Coiltek Factory Authorized "Master Dealer" here in Arizona. We stock all Coiltek Searchcoils and Products. Thanks for viewing this item.